{"title":"K\u0026N Air Intake Systems","description":"\u003cmeta charset=\"utf-8\"\u003e\r\n\u003cp\u003e\u003cspan\u003eWe feel a high quality performance intake system is one of the best dollars to horsepower investments you can make and once again K\u0026amp;N is the clearly defined leader when it comes to cold air intakes. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBOLT-ON HORSEPOWER GUARANTEED!\u003c\/b\u003e\u003cspan\u003e K\u0026amp;N Performance Air Intake systems are built for horsepower. If K\u0026amp;N can’t increase a car or truck's horsepower K\u0026amp;N won’t build a cold air intake for it. It’s that simple. K\u0026amp;N establishes a stock baseline horsepower with their in house dynamometers and then designs K\u0026amp;N air intakes to get the largest horsepower gain attainable without causing a “Check Engine Light” to come on. K\u0026amp;N horsepower numbers are not based on the single biggest gain from one particular vehicle but are an average of runs and vehicles. Many times an identical vehicle will perform differently so K\u0026amp;N wants to ensure repeatable numbers you can count on. In today’s market place there are some pretty big cold air intake claims. K\u0026amp;N doesn't make claims; they present the facts, backed up by well documented tests. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eK\u0026amp;N invented the world’s first air filter guaranteed for one million miles. That same warranty applies to K\u0026amp;N High-Flow Air Intake Systems. K\u0026amp;N products are well engineered, built with the finest materials and K\u0026amp;N stands behind them 100% Buy a K\u0026amp;N Cold Air Intake today. You'll be glad you did.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/files\/K_N_air_intake_-_superior_airflow_-_bolo_motorsports_1024x1024.jpg?v=1537916247\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e","products":[{"product_id":"k-n-air-intake-2003-2009-audi-a3-1-6-fsi-vw-touran-golf-v-1-9","title":"K\u0026N Air Intake 2003-2009 Audi A3 1.6 FSi VW Touran, Golf V 1.6","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0600 and it fits 2003-2009 Audi A3 1.6 FSi VW Touran, Golf V 1.6  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118006382711,"sku":"57-0600","price":205.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/8153f4db6223bd0fb96d93dcc150192a.jpg?v=1571438945"},{"product_id":"k-n-air-intake-2003-2008-ford-ka-1-3-and-1-6-gas-1","title":"K\u0026N Air Intake 2003-2008 Ford KA 1.3 and 1.6 GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0489 and it fits 2003-2008 Ford KA 1.3 and 1.6 GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118158753911,"sku":"57-0489","price":223.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/4a2a29aa37c09f76f067cbfe67190a6a.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2000-2008-alfa-romeo-147-1-6-and-2-0-gas-and-2004-2008-alfa-romeo-gt-1-8-gas-1","title":"K\u0026N Air Intake 2000-2008 Alfa Romeo 147 1.6 and 2.0 GAS and 2004-2008 Alfa Romeo GT 1.8 GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0492 and it fits 2000-2008 Alfa Romeo 147 1.6 and 2.0 GAS and 2004-2008 Alfa Romeo GT 1.8 GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118158786679,"sku":"57-0492","price":212.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/5622ffbd858ec5d9fb0f2ecc76399c70.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2007-2009-hyundai-i30-and-kia-cee-d-2-0-gas-and-2000-2006-hyundai-accent-1-3-and-1-5-102hp-1-6-gas","title":"K\u0026N Air Intake 2007-2009 Hyundai I30 and Kia Cee D 2.0 GAS and 2000-2006 Hyundai Accent 1.3 and 1.5 102hp + 1.6 GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0520 and it fits 2007-2009 Hyundai I30 and Kia Cee D 2.0 GAS and 2000-2006 Hyundai Accent 1.3 and 1.5 102hp and 1.6 GAS   models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118158852215,"sku":"57-0520","price":260.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/4fda60cd9f235cca8a1f8d5bcde244fb.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2005-2010-fiat-grande-punto-and-2007-2010-fiat-bravo-16v-non-turbo-1-4-gas-2","title":"K\u0026N Air Intake 2005-2010 Fiat Grande Punto and 2007-2010 Fiat Bravo 16v Non Turbo 1.4 GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0562 and it fits 2005-2010 Fiat Grande Punto and 2007-2010 Fiat Bravo 16v Non Turbo 1.4 GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118158884983,"sku":"57-0562","price":190.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/44f1bc7fa4429628a1f18722bdb9be86.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2003-2008-audi-a3-2006-2008-tt-2-0-turbo-gas-2009-2010-golf-scirocco-270hp-2-0-gas-2005-2008-passat-jetta-golf-eos-200hp-2-0-gas-6","title":"K\u0026N Air Intake 2003-2008 Audi A3 + 2006-2008 TT 2.0 Turbo GAS + 2009-2010 Golf + Scirocco 270hp 2.0 GAS + 2005-2008 Passat Jetta Golf EOS 200hp 2.0 GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0570 and it fits 2003-2008 Audi A3 and 2006-2008 TT 2.0 Turbo GAS AND 2009-2010 VW Golf and Scirocco 270hp 2.0 GAS and 2005-2008 Passat Jetta Golf EOS 200hp 2.0 GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118158950519,"sku":"57-0570","price":292.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/7d662b967ec455010b8f598c28f9faf5.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2004-2010-opel-vauxhall-tigra-and-2003-2006-corsa-c-1-3-diesel-2","title":"K\u0026N Air Intake 2004-2010 Opel Vauxhall Tigra and 2003-2006 Corsa C 1.3 DIESEL","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0585 and it fits 2004-2010 Opel Vauxhall Tigra and 2003-2006 Corsa C 1.3 DIESEL  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118158983287,"sku":"57-0585","price":194.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/f3f6f56d731dbb3efb9628b8c7cd9b38.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2004-2009-opel-astra-h-and-vauxhall-astra-mk5-1-4-1-6-105hp-and-1-8-gas-2","title":"K\u0026N Air Intake 2004-2009 Opel Astra H and Vauxhall Astra MK5 1.4 1.6 105hp and 1.8 GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0589 and it fits 2004-2009 Opel Astra H and Vauxhall Astra MK5 1.4 1.6 105hp and 1.8 GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159016055,"sku":"57-0589","price":235.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/b1f0b2e9efec17dc601198da1104f67e.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2007-2009-toyota-verso-1-6-1-8-and-2001-2007-toyota-corolla-1-4-1-6-1-8-and-2003-2008-toyota-avensis-1-6-1-8-2-0-2-7","title":"K\u0026N Air Intake 2007-2009 Toyota Verso 1.6 1.8 and 2001-2007 Toyota Corolla 1.4 1.6 1.8  and 2003-2008 Toyota Avensis 1.6 1.8 2.0 2.4","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0594 and it fits 2007-2009 Toyota Verso 1.6 1.8 and 2001-2007 Toyota Corolla 1.4 1.6 1.8  and 2003-2008 Toyota Avensis 1.6 1.8 2.0 2.4  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159048823,"sku":"57-0594","price":277.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/bcde96bb24df32d7f70e9aa2d0b6d3cd.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2006-2009-ford-mondeo-1-6-2-0-2-3-gas-s-max-and-galaxy-2-0-2-3-gas-2004-2009-ford-focus-and-cmax-1-6-1-8-2-0-gas-and-2004-2009-volvo-c30-s40-v50-1-8-and-2-0-gas-3","title":"K\u0026N Air Intake 2006-2009 Ford Mondeo 1.6 2.0 2.3 GAS S-Max and Galaxy 2.0 2.3 GAS 2004-2009 Ford Focus and CMAX 1.6 1.8 2.0 GAS AND 2004-2009 Volvo C30 S40 V50 1.8 and 2.0 GAS","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0595 and it fits K\u0026amp;N 57i Air Intake 2006-2009 Ford Mondeo 1.6 2.0 2.3 GAS S-Max and Galaxy 2.0 2.3 GAS 2004-2009 Ford Focus and CMAX 1.6 1.8 2.0 GAS AND 2004-2009 Volvo C30 S40 V50 1.8 and 2.0 GAS  models.  If your vehicle has a turbocharger, this item will not fit.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159081591,"sku":"57-0595","price":226.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/02c437ec9f7ebe5af8ed4ced987b8eaf.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2004-2009-euro-volvo-c30-s40-v50-euro-ford-focus-ii-and-c-max-1-8-2-3","title":"K\u0026N Air Intake 2004-2009 Euro Volvo C30 S40 + V50 Euro Ford Focus II and C-Max 1.8 + 2.0","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0595 and it fits 2004-2009 Volvo C30 S40 and V50 Ford Focus II and C-Max 1.8 and 2.0 models.  If your vehicle has a turbocharger, this item will not fit.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159114359,"sku":"57-0595-","price":226.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/02c437ec9f7ebe5af8ed4ced987b8eaf_aac33963-6585-4e08-bf1b-6ff0fd047d8c.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2001-2010-opel-zafira-ii-2-0-gas-and-2001-2009-vauxhall-zafira-2-0-192hp-gas-2","title":"K\u0026N Air Intake 2001-2010 Opel Zafira II 2.0 GAS and 2001-2009 Vauxhall Zafira 2.0 192hp GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0603 and it fits 2001-2010 Opel Zafira II 2.0 GAS and 2001-2009 Vauxhall Zafira 2.0 192hp GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159179895,"sku":"57-0603","price":241.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/3627bddc88218d4b5fde1558fabe6140.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2004-2009-opel-astra-h-and-vauxhall-astra-mk5-1-7-diesel-1","title":"K\u0026N Air Intake 2004-2009 Opel Astra H and Vauxhall Astra MK5 1.7 DIESEL","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0625 and it fits 2004-2009 Opel Astra H and Vauxhall Astra MK5 1.7 DIESEL  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159212663,"sku":"57-0625","price":265.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/b1ae8484cfa5ae17c15740989805fdb5.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2005-2008-ford-fiesta-v-2-0-4cyl-gas-1","title":"K\u0026N Air Intake 2005-2008 Ford Fiesta V 2.0 4Cyl GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0631 and it fits 2005-2008 Ford Fiesta V 2.0 4Cyl GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159245431,"sku":"57-0631","price":232.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/dd6ccf920ca257c88e1fc9c682f42c35.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2004-2010-opel-vauxhall-tigra-1-4-gas-2","title":"K\u0026N Air Intake 2004-2010 Opel Vauxhall Tigra 1.4 GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0634 and it fits 2004-2010 Opel Vauxhall Tigra 1.4 GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159507575,"sku":"57-0634","price":349.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/73ba9d02988073783ad3c1bbb297b435.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2005-2010-bmw-118i-120i-318i-320i-2-0-gas-1","title":"K\u0026N Air Intake 2005-2010 BMW 118I 120I 318I 320I 2.0 Gas","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0648-1 and it fits 2005-2010 BMW 118I 120I 318I 320I 2.0 Gas  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159540343,"sku":"57-0648-1","price":227.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/3aea5fd40228a4499a1320978e6abd4e.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2004-2009-opel-astra-h-and-vauxhall-astra-mk5-150hp-1-9-diesel-2","title":"K\u0026N Air Intake 2004-2009 Opel Astra H and Vauxhall Astra MK5 150hp 1.9 DIESEL","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0650 and it fits 2004-2009 Opel Astra H and Vauxhall Astra MK5 150hp 1.9 DIESEL  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159573111,"sku":"57-0650","price":206.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/f327c6b1bafa52d918713249c337e417.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2005-2009-renault-clio-iii-1-4-1-6-gas-and-2007-2009-renault-clio-iii-1-2-101hp-gas-1","title":"K\u0026N Air Intake 2005-2009 Renault Clio III 1.4 1.6 GAS and 2007-2009 Renault Clio III 1.2 101hp GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0651 and it fits 2005-2009 Renault Clio III 1.4 1.6 GAS and 2007-2009 Renault Clio III 1.2 101hp GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159605879,"sku":"57-0651","price":223.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/dbd90d4f81a3587fd3f984c83556e1de.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2004-2009-opel-astra-h-and-vauxhall-astra-mk5-2-0-gas-and-2006-2009-1-6-turbo-gas-2","title":"K\u0026N Air Intake 2004-2009 Opel Astra H and Vauxhall Astra MK5 2.0 GAS and 2006-2009 1.6 Turbo GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0652 and it fits 2004-2009 Opel Astra H and Vauxhall Astra MK5 2.0 GAS and 2006-2009 1.6 Turbo GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159638647,"sku":"57-0652","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/1aab97352c4151e04361e27d8c528f4b.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2004-2010-opel-vauxhall-tigra-1-8-gas-2","title":"K\u0026N Air Intake 2004-2010 Opel Vauxhall Tigra 1.8 GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0654 and it fits 2004-2010 Opel Vauxhall Tigra 1.8 GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159671415,"sku":"57-0654","price":169.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/28b2f4791a7bb041b53bd3714ef9da23.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2005-2010-fiat-grande-punto-1-2-and-1-4-8v-and-2007-2010-fiat-500-1-2-gas-2","title":"K\u0026N Air Intake 2005-2010 Fiat Grande Punto 1.2 and 1.4 8v AND 2007-2010 Fiat 500 1.2 GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0655 and it fits 2005-2010 Fiat Grande Punto 1.2 and 1.4 8v AND 2007-2010 Fiat 500 1.2 GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159704183,"sku":"57-0655","price":158.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/411892435d3195393dfe164e0930ebea.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2005-2009-mazda-mx-5-iii-1-8-4cyl-1","title":"K\u0026N Air Intake 2005-2009 Mazda MX-5 III 1.8 4Cyl","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0656 and it fits 2005-2009 Mazda MX-5 III 1.8 4Cyl  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159736951,"sku":"57-0656","price":307.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/6fa924d941864137f2ea2b4d924b7fd7.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2005-2009-renault-clio-iii-2-0-197hp-gas-right-hand-drive-1","title":"K\u0026N Air Intake 2005-2009 Renault Clio III 2.0 197hp GAS Right Hand Drive","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0657 and it fits 2005-2009 Renault Clio III 2.0 197hp GAS Right Hand Drive  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159769719,"sku":"57-0657","price":266.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/27ea3c5b747ed3bf3d57fbd50fff783e.jpg?v=1571439019"},{"product_id":"k-n-air-intake-2007-2010-fiat-500-non-turbo-and-2006-2009-fiat-panda-1-4-gas-2","title":"K\u0026N Air Intake 2007-2010 Fiat 500 Non Turbo and 2006-2009 Fiat Panda 1.4 GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0659 and it fits 2007-2010 Fiat 500 Non Turbo and 2006-2009 Fiat Panda 1.4 GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159835255,"sku":"57-0659","price":263.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/269b2cd3ac09bd826516e3f6b12b2b17.jpg?v=1571439020"},{"product_id":"k-n-air-intake-2006-2010-opel-corsa-d-and-vauxhall-corsa-mk3-1-0-1-2-1-4-w-out-mass-air-sensor-gas-2","title":"K\u0026N Air Intake 2006-2010 Opel Corsa D and Vauxhall Corsa MK3 1.0 1.2 1.4 w\/out Mass Air Sensor GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0663 and it fits 2006-2010 Opel Corsa D and Vauxhall Corsa MK3 1.0 1.2 1.4 w\/out Mass Air Sensor GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159868023,"sku":"57-0663","price":289.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/36f367cefd52ae67a49a884751e870ef.jpg?v=1571439020"},{"product_id":"k-n-air-intake-2007-2009-toyota-yaris-1-8-gas-1","title":"K\u0026N Air Intake 2007-2009 Toyota Yaris 1.8 GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0666 and it fits 2007-2009 Toyota Yaris 1.8 GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159900791,"sku":"57-0666","price":188.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/4e6fc2bac99c50228a278c9a2ae32850.jpg?v=1571439020"},{"product_id":"k-n-air-intake-2006-2010-fiat-grande-punto-1-9-diesel-and-2005-2010-opel-vauxhall-corsa-d-meriva-turbo-180hp-1-6-gas-3","title":"K\u0026N Air Intake 2006-2010 Fiat Grande Punto 1.9 DIESEL AND 2005-2010 Opel \/ Vauxhall Corsa D Meriva Turbo 180hp 1.6 GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0667 and it fits 2006-2010 Fiat Grande Punto 1.9 DIESEL AND 2005-2010 Opel \/ Vauxhall Corsa D Meriva Turbo 180hp 1.6 GAS   models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159933559,"sku":"57-0667","price":223.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/1f8fac9117cc43b7c01aa03366b9d2c0.jpg?v=1571439020"},{"product_id":"k-n-air-intake-2007-2009-toyota-auris-1-4-1-6-gas-1","title":"K\u0026N Air Intake 2007-2009 Toyota Auris 1.4 1.6 GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0674 and it fits 2007-2009 Toyota Auris 1.4 1.6 GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159966327,"sku":"57-0674","price":232.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/711d62cf14550e7b360b54a44cd455bd.jpg?v=1571439020"},{"product_id":"k-n-air-intake-2007-2008-honda-jazz-1-4-gas-1","title":"K\u0026N Air Intake 2007-2008 Honda Jazz 1.4 GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0675 and it fits 2007-2008 Honda Jazz 1.4 GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118159999095,"sku":"57-0675","price":307.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/62e8d112acd2e83191c5c1061c165280.jpg?v=1571439020"},{"product_id":"k-n-air-intake-2007-2009-renault-twingo-1-2-turbo-gas-1","title":"K\u0026N Air Intake 2007-2009 Renault Twingo 1.2 Turbo GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0677 and it fits 2007-2009 Renault Twingo 1.2 Turbo GAS  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160031863,"sku":"57-0677","price":277.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/5b6edf5fd302616e3e2e8479ba5bb324.jpg?v=1571439020"},{"product_id":"k-n-air-intake-2008-2011-alfa-romeo-mito-and-fiat-punto-1-4-turbo-2","title":"K\u0026N Air Intake 2008-2011 Alfa Romeo Mito and Fiat Punto 1.4 Turbo","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0679 and it fits 2008-2011 Alfa Romeo Mito and Fiat Punto 1.4 Turbo  models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160064631,"sku":"57-0679","price":217.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/6363e27ac5072442aef3a65d79bfc0c1.jpg?v=1571439020"},{"product_id":"k-n-air-intake-2007-2011-hyundai-i30-and-kia-cee-d-1-4-1-6-gas","title":"K\u0026N Air Intake 2007-2011 Hyundai I30 and Kia Cee D 1.4 + 1.6 GAS","description":"As with all our kits, when you bolt-on a 57i intake, you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.  57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..  These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K\u0026amp;N O\/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon and ensure long life. \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0683 and it fits 2007-2011 Hyundai I30 and 2007-2011 Kia Cee D 1.4 and 1.6 GAS models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160130167,"sku":"57-0683","price":191.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/e1081846855410325d9bec86d3b32e5a.jpg?v=1571439020"},{"product_id":"k-n-air-intake-2006-2010-renault-clio-iii-2-0-197-201-hp-1","title":"K\u0026N Air Intake 2006-2010 Renault Clio III 2.0 197\/201 hp","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-0689 and it fits 2006-2010 Renault Clio III 2.0 197\/201 hp models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160162935,"sku":"57-0689","price":245.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/b077f368a1bb80ffcb771d91ce8f0d75.jpg?v=1571439020"},{"product_id":"k-n-air-intake-1992-1999-e36-bmw-323-and-328-i-ic-is-ci-2-5-and-2-8-and-1995-1999-bmw-m3-3-26cyl-2","title":"K\u0026N Air Intake 1992-1999 E36 BMW 323 and 328 i ic is ci 2.5 and 2.8 and 1995-1999 BMW M3 3.26Cyl","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1000 and it fits 1992-1999 E36 BMW 323 and 328 i ic is ci 2.5 and 2.8 and 1995-1999 BMW M3 3.26Cyl models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160195703,"sku":"57-1000","price":466.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/96e5b7e7d40f72994ad4d4d854c1c86a.jpg?v=1571439020"},{"product_id":"k-n-air-intake-2000-2005-bmw-330-i-ci-xi-3-0-6cyl-1","title":"K\u0026N Air Intake 2000-2005 BMW 330 i Ci Xi 3.0 6Cyl","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1001 and it fits 2000-2005 BMW 330 i Ci Xi 3.0 6Cyl models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160228471,"sku":"57-1001","price":454.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/178e4411cb19498b9185b4554003ab75.jpg?v=1571439020"},{"product_id":"k-n-air-intake-2001-2005-bmw-325-i-ci-xi-2-5-6cyl-and-1999-2000-323-and-328-i-and-ci-e46-2-5-and-2-8-6cyl-1","title":"K\u0026N Air Intake 2001-2005 BMW 325 i Ci Xi 2.5 6Cyl and 1999-2000 323 and 328 i and Ci E46 2.5 and 2.8 6Cyl","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1002 and it fits 2001-2005 BMW 325 i Ci Xi 2.5 6Cyl and 1999-2000 323 and 328 i and Ci E46 2.5 and 2.8 6Cyl models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160261239,"sku":"57-1002","price":460.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/4a31a532a563e8075ad7c874913ede0e.jpg?v=1571439020"},{"product_id":"k-n-air-intake-2001-2005-bmw-m3-3-2-6cyl-1","title":"K\u0026N Air Intake 2001-2005 BMW M3 3.2 6Cyl","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1003 and it fits 2001-2005 BMW M3 3.2 6Cyl models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160294007,"sku":"57-1003","price":532.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/acd80e522e20247de8167b2435db1516.jpg?v=1571439020"},{"product_id":"k-n-air-intake-2008-2013-polaris-ranger-rzr800-761","title":"K\u0026N Air Intake 2008-2013 Polaris Ranger RZR800 760","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1120 and it fits 2008-2013 Polaris Ranger RZR800 760  models.\u003cbr\u003e\u003cbr\u003eThis item is street legal and comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160326775,"sku":"57-1120","price":520.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/338ddb7ecc6ac2f461730162362b4039.jpg?v=1571439020"},{"product_id":"k-n-air-intake-2008-2011-yamaha-yxr700-rhino-fi-687","title":"K\u0026N Air Intake 2008-2011 Yamaha YXR700 RHINO FI 686","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1121 and it fits 2008-2011 Yamaha YXR700 RHINO FI 686 models.\u003cbr\u003e\u003cbr\u003eThis item is street legal and comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160359543,"sku":"57-1121","price":509.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/a913779788877d6bb5a0e3bc64579bbc.jpg?v=1571439020"},{"product_id":"k-n-air-intake-2008-2009-kawasaki-kfx450r-1","title":"K\u0026N Air Intake 2008-2009 Kawasaki KFX450R","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1124 and it fits 2008-2009 Kawasaki KFX450R models.\u003cbr\u003e\u003cbr\u003eThis item is street legal and comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.  4.57 HP Increase","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160425079,"sku":"57-1124","price":469.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/1a8862bafca6ec0f1fe9a30128b2524f.png?v=1571439020"},{"product_id":"k-n-air-intake-2011-2014-polaris-rzr900-ranger-rzr900-876","title":"K\u0026N Air Intake 2011-2014 Polaris RZR900, Ranger RZR900 875","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1129 and it fits 2011-2014 Polaris RZR900, Ranger RZR900 875 models.\u003cbr\u003e\u003cbr\u003eThis item is street legal and comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160457847,"sku":"57-1129","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/a4632a343c482ab6b210bf9bc259e0b2.jpg?v=1571439020"},{"product_id":"k-n-air-intake-1991-1996-dodge-stealth-and-1991-1999-mitsubishi-3000gt-3-2","title":"K\u0026N Air Intake 1991-1996 Dodge Stealth and 1991-1999 Mitsubishi 3000GT 3.0","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1500-1 and it fits 1991-1996 Dodge Stealth and 1991-1999 Mitsubishi 3000GT 3.0 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160490615,"sku":"57-1500-1","price":314.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/9f1f4c6011380f4b426ec77b025a2c05.jpg?v=1571439020"},{"product_id":"k-n-air-intake-1992-1996-dodge-dakota-3-9-v6-and-5-2-v8-1","title":"K\u0026N Air Intake 1992-1996 Dodge Dakota 3.9 V6 AND 5.2 V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1501 and it fits 1992-1996 dodge Dakota 3.9 V6 AND 5.2 V8 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160523383,"sku":"57-1501","price":286.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/335645f9c01f27e7666b9f3adcfbaf35.jpg?v=1571439020"},{"product_id":"k-n-air-intake-1994-2000-dodge-ram-1500-3-9-v6-1","title":"K\u0026N Air Intake 1994-2000 Dodge Ram 1500 3.9 V6","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1503-1 and it fits 1994-2000 Dodge Ram 1500 3.9 V6 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160588919,"sku":"57-1503-1","price":266.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/7c26cd55cc8d97a7d51f108e606dcb31.jpg?v=1571439020"},{"product_id":"k-n-air-intake-1994-2002-dodge-ram-2500-3500-8-0-v10-1","title":"K\u0026N Air Intake 1994-2002 Dodge Ram 2500 3500 8.0 V10","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1507 and it fits 1994-2002 Dodge Ram 2500 3500 8.0 V10 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160654455,"sku":"57-1507","price":706.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/4a829a91cd25cb6ccb2a0642f1b1af97.jpg?v=1571439020"},{"product_id":"k-n-air-intake-1995-1998-dodge-viper-8-0-v10-1","title":"K\u0026N Air Intake 1995-1998 Dodge Viper 8.0 V10","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1508 and it fits 1995-1998 Dodge Viper 8.0 V10 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160687223,"sku":"57-1508","price":940.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/d2b4b236aebda71c9fcdcf379538f0a4.jpg?v=1571439020"},{"product_id":"k-n-air-intake-1997-1999-dodge-dakota-and-1998-1999-dodge-durango-5-2-and-5-9-v8-2","title":"K\u0026N Air Intake 1997-1999 Dodge Dakota and 1998-1999 Dodge Durango 5.2 AND 5.9 V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1509-1 and it fits 1997-1999 Dodge Dakota and 1998-1999 Dodge Durango 5.2 AND 5.9 V8 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160719991,"sku":"57-1509-1","price":472.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/7f1d2f83710c4f25781320a594944933.jpg?v=1571439020"},{"product_id":"k-n-air-intake-1994-2001-dodge-ram-1500-2500-3500-5-2-v8-1","title":"K\u0026N Air Intake 1994-2001 Dodge Ram 1500 2500 3500 5.2  V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1511-2 and it fits 1994-2001 Dodge Ram 1500 2500 3500 5.2 V8 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160752759,"sku":"57-1511-2","price":455.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/6d862317389705118004e086224c9ce1.jpg?v=1571439020"},{"product_id":"k-n-air-intake-1995-1999-dodge-neon-2-0-sohc-1","title":"K\u0026N Air Intake 1995-1999 Dodge Neon 2.0 SOHC","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1512 and it fits 1995-1999 Dodge Neon 2.0 SOHC models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160851063,"sku":"57-1512","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/0716d96a5003708d63dbb48c7eb0652c.jpg?v=1571439020"},{"product_id":"k-n-air-intake-1997-2006-jeep-wrangler-tj-4-0-v6-1","title":"K\u0026N Air Intake 1997-2006 Jeep Wrangler TJ 4.0 V6","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1514-1 and it fits 1997-2006 Jeep Wrangler TJ 4.0 V6 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 State Street Legal and comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160916599,"sku":"57-1514-1","price":406.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/8c872188358e463c801a1864d6875ea1.jpg?v=1571439020"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/collections\/Bolomotorsports.com_-_K_N_Air_Intake_-_Blue.png?v=1537916583","url":"https:\/\/www.bolomotorsports.com\/collections\/k-n-air-intake-systems-automated.oembed?page=10","provider":"Bolo Motorsports","version":"1.0","type":"link"}