{"title":"K\u0026N Air Intakes for Dodge","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eWe feel a high quality performance intake system is one of the best dollars to horsepower investments you can make and once again K\u0026amp;N is the clearly defined leader when it comes to cold air intakes. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBOLT-ON HORSEPOWER GUARANTEED!\u003c\/b\u003e\u003cspan\u003e K\u0026amp;N Performance Air Intake systems are built for horsepower. If K\u0026amp;N can’t increase a car or truck's horsepower K\u0026amp;N won’t build a cold air intake for it. It’s that simple. K\u0026amp;N establishes a stock baseline horsepower with their in house dynamometers and then designs K\u0026amp;N air intakes to get the largest horsepower gain attainable without causing a “Check Engine Light” to come on. K\u0026amp;N horsepower numbers are not based on the single biggest gain from one particular vehicle but are an average of runs and vehicles. Many times an identical vehicle will perform differently so K\u0026amp;N wants to ensure repeatable numbers you can count on. In today’s market place there are some pretty big cold air intake claims. K\u0026amp;N doesn't make claims; they present the facts, backed up by well documented tests. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eK\u0026amp;N invented the world’s first air filter guaranteed for one million miles. That same warranty applies to K\u0026amp;N High-Flow Air Intake Systems. K\u0026amp;N products are well engineered, built with the finest materials and K\u0026amp;N stands behind them 100% Buy a K\u0026amp;N Cold Air Intake today. You be glad you did.\u003c\/span\u003e","products":[{"product_id":"k-n-air-intake-1991-1996-dodge-stealth-and-1991-1999-mitsubishi-3000gt-3-2","title":"K\u0026N Air Intake 1991-1996 Dodge Stealth and 1991-1999 Mitsubishi 3000GT 3.0","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1500-1 and it fits 1991-1996 Dodge Stealth and 1991-1999 Mitsubishi 3000GT 3.0 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160490615,"sku":"57-1500-1","price":314.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/9f1f4c6011380f4b426ec77b025a2c05.jpg?v=1571439020"},{"product_id":"k-n-air-intake-1992-1996-dodge-dakota-3-9-v6-and-5-2-v8-1","title":"K\u0026N Air Intake 1992-1996 Dodge Dakota 3.9 V6 AND 5.2 V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1501 and it fits 1992-1996 dodge Dakota 3.9 V6 AND 5.2 V8 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160523383,"sku":"57-1501","price":286.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/335645f9c01f27e7666b9f3adcfbaf35.jpg?v=1571439020"},{"product_id":"k-n-air-intake-1994-2000-dodge-ram-1500-3-9-v6-1","title":"K\u0026N Air Intake 1994-2000 Dodge Ram 1500 3.9 V6","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1503-1 and it fits 1994-2000 Dodge Ram 1500 3.9 V6 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160588919,"sku":"57-1503-1","price":266.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/7c26cd55cc8d97a7d51f108e606dcb31.jpg?v=1571439020"},{"product_id":"k-n-air-intake-1994-2002-dodge-ram-2500-3500-8-0-v10-1","title":"K\u0026N Air Intake 1994-2002 Dodge Ram 2500 3500 8.0 V10","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1507 and it fits 1994-2002 Dodge Ram 2500 3500 8.0 V10 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160654455,"sku":"57-1507","price":706.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/4a829a91cd25cb6ccb2a0642f1b1af97.jpg?v=1571439020"},{"product_id":"k-n-air-intake-1995-1998-dodge-viper-8-0-v10-1","title":"K\u0026N Air Intake 1995-1998 Dodge Viper 8.0 V10","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1508 and it fits 1995-1998 Dodge Viper 8.0 V10 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160687223,"sku":"57-1508","price":940.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/d2b4b236aebda71c9fcdcf379538f0a4.jpg?v=1571439020"},{"product_id":"k-n-air-intake-1997-1999-dodge-dakota-and-1998-1999-dodge-durango-5-2-and-5-9-v8-2","title":"K\u0026N Air Intake 1997-1999 Dodge Dakota and 1998-1999 Dodge Durango 5.2 AND 5.9 V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1509-1 and it fits 1997-1999 Dodge Dakota and 1998-1999 Dodge Durango 5.2 AND 5.9 V8 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160719991,"sku":"57-1509-1","price":472.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/7f1d2f83710c4f25781320a594944933.jpg?v=1571439020"},{"product_id":"k-n-air-intake-1994-2001-dodge-ram-1500-2500-3500-5-2-v8-1","title":"K\u0026N Air Intake 1994-2001 Dodge Ram 1500 2500 3500 5.2  V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1511-2 and it fits 1994-2001 Dodge Ram 1500 2500 3500 5.2 V8 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160752759,"sku":"57-1511-2","price":455.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/6d862317389705118004e086224c9ce1.jpg?v=1571439020"},{"product_id":"k-n-air-intake-1995-1999-dodge-neon-2-0-sohc-1","title":"K\u0026N Air Intake 1995-1999 Dodge Neon 2.0 SOHC","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1512 and it fits 1995-1999 Dodge Neon 2.0 SOHC models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160851063,"sku":"57-1512","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/0716d96a5003708d63dbb48c7eb0652c.jpg?v=1571439020"},{"product_id":"k-n-air-intake-2000-2004-dodge-dakota-and-2000-2003-dodge-durango-4-7-v8-4","title":"K\u0026N Air Intake 2000-2004 Dodge Dakota and 2000-2003 Dodge Durango 4.7 V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1516 and it fits 2000-2004 Dodge Dakota and 2000-2003 Dodge Durango 4.7 V8 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118160982135,"sku":"57-1516","price":478.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/09d4ae0371606418b0792927614aae93.jpg?v=1571439021"},{"product_id":"k-n-air-intake-2000-2003-dodge-dakota-and-dodge-durango-5-9-v8-2","title":"K\u0026N Air Intake 2000-2003 Dodge Dakota and Dodge Durango 5.9 V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1517-2 and it fits 2000-2003 Dodge Dakota and Dodge Durango 5.9 V8 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118161014903,"sku":"57-1517-2","price":470.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/fe3182b28f0a205b976aa119d6a638c0.jpg?v=1571439021"},{"product_id":"k-n-air-intake-2000-2004-chrysler-300m-and-dodge-intrepid-3-5-v6-2","title":"K\u0026N Air Intake 2000-2004 Chrysler 300M AND Dodge Intrepid 3.5 V6","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1522 and it fits 2000-2004 Chrysler 300M AND Dodge Intrepid 3.5 V6 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118161178743,"sku":"57-1522","price":475.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/4bce33de47885a6645df079f9b339a72.jpg?v=1571439021"},{"product_id":"k-n-air-intake-1998-2004-dodge-intrepid-2-7-v6-1","title":"K\u0026N Air Intake 1998-2004 Dodge Intrepid 2.7 V6","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1523 and it fits 1998-2004 Dodge Intrepid 2.7 V6 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118161211511,"sku":"57-1523","price":475.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/186972c1a9476f128b74dc3dadd38362.jpg?v=1571439021"},{"product_id":"k-n-air-intake-1998-2000-dodge-avenger-2-5-v6-1","title":"K\u0026N Air Intake 1998-2000 Dodge Avenger 2.5 V6","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1524 and it fits 1998-2000 Dodge Avenger 2.5 V6 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118161277047,"sku":"57-1524","price":511.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/b9ea3e2a2bd371042231ecf00f2eba9d.jpg?v=1571439021"},{"product_id":"k-n-air-intake-1994-2002-dodge-ram-2500-3500-5-9-diesel-1","title":"K\u0026N Air Intake 1994-2002 Dodge Ram 2500 3500 5.9 Diesel","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1525 and it fits 1994-2002 Dodge Ram 2500 3500 5.9 Diesel models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118161309815,"sku":"57-1525","price":469.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/3eec0bbc1553d6ac906c3df64234f8f4.jpg?v=1571439021"},{"product_id":"k-n-air-intake-1994-2001-dodge-ram-1500-3-9-v6-1","title":"K\u0026N Air Intake 1994-2001 Dodge Ram 1500 3.9 V6","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1527-1 and it fits 1994-2001 Dodge Ram 1500 3.9 V6 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118161440887,"sku":"57-1527-1","price":563.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/ed2e1a852d0258e17c171a48012937cb.jpg?v=1571439021"},{"product_id":"k-n-air-intake-2002-2012-dodge-ram-1500-4-7-v8-2","title":"K\u0026N Air Intake 2002-2012 Dodge Ram 1500 4.7 V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1529 and it fits 2002-2012 Dodge Ram 1500 4.7 V8 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118161506423,"sku":"57-1529","price":458.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/d29659305dbce9af7839ca75d38d399f.jpg?v=1571439021"},{"product_id":"k-n-air-intake-2002-2003-dodge-ram-1500-5-9-v8-1","title":"K\u0026N Air Intake 2002-2003 Dodge Ram 1500 5.9 V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1530-1 and it fits 2002-2003 Dodge Ram 1500 5.9 V8 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118161539191,"sku":"57-1530-1","price":608.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/78811812d6515d740942ad2b6cbaac30.jpg?v=1571439021"},{"product_id":"k-n-air-intake-2003-2007-dodge-ram-2500-3500-5-9-diesel-1","title":"K\u0026N Air Intake 2003-2007 Dodge Ram 2500 3500 5.9 Diesel","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1532 and it fits 2003-2007 Dodge Ram 2500 3500 5.9 Diesel models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118161637495,"sku":"57-1532","price":445.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/086bbee8cca0e628cc038eab0d7b59f2.jpg?v=1571439021"},{"product_id":"k-n-air-intake-2003-2008-dodge-ram-1500-2500-3500-5-7-v8-2","title":"K\u0026N Air Intake 2003-2008 Dodge Ram 1500 2500 3500 5.7 V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1533 and it fits 2003-2008 Dodge Ram 1500 2500 3500 5.7 V8 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118161670263,"sku":"57-1533","price":458.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/e725b002882f7e6b0fc7ea79fde57d00.jpg?v=1571439021"},{"product_id":"k-n-air-intake-2000-2005-dodge-neon-2-1","title":"K\u0026N Air Intake 2000-2005 Dodge Neon 2.0","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1534 and it fits 2000-2005 Dodge Neon 2.0 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118161703031,"sku":"57-1534","price":451.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/db66c82ff031b5569a6d725ddbb1188c.jpg?v=1571439021"},{"product_id":"k-n-air-intake-2003-2005-dodge-neon-srt-4-2-5","title":"K\u0026N Air Intake 2003-2005 Dodge Neon SRT-4 2.4","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1535 and it fits 2003-2005 Dodge Neon SRT-4 2.4 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118161801335,"sku":"57-1535","price":520.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/a8c4e68efa599fa6971708045d5f43da.jpg?v=1571439021"},{"product_id":"k-n-air-intake-2003-2006-dodge-viper-8-3-v10-1","title":"K\u0026N Air Intake 2003-2006 Dodge Viper 8.3 V10","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1536 and it fits 2003-2006 Dodge Viper 8.3 V10 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118161866871,"sku":"57-1536","price":464.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/b39d22d73c4da751cf7ab71f09e514cb.jpg?v=1571439021"},{"product_id":"k-n-air-intake-2002-2011-dodge-ram-1500-3-7-v6-1","title":"K\u0026N Air Intake 2002-2011 Dodge Ram 1500 3.7 V6","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1537 and it fits 2002-2011 Dodge Ram 1500 3.7 V6 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118161899639,"sku":"57-1537","price":563.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/eb75f8a26de5c8f7a9c5634c7f8350d4.jpg?v=1571439021"},{"product_id":"k-n-air-intake-2004-2006-dodge-durango-4-7-v8-1","title":"K\u0026N Air Intake 2004-2006 Dodge Durango 4.7 V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1538 and it fits 2004-2006 Dodge Durango 4.7 V8 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118161932407,"sku":"57-1538","price":529.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/c863688b9e30aa7e43c635c0e67c84f9.jpg?v=1571439022"},{"product_id":"k-n-air-intake-2004-2006-dodge-durango-and-2007-chrysler-aspen-5-7-v8-2","title":"K\u0026N Air Intake 2004-2006 Dodge Durango and 2007 Chrysler Aspen 5.7 V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1539 and it fits 2004-2006 Dodge Durango and 2007 Chrysler Aspen 5.7 V8 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118161965175,"sku":"57-1539","price":532.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/67c174f608b1823aaacada37fe57a514.jpg?v=1571439022"},{"product_id":"k-n-air-intake-2004-2006-dodge-ram-srt-10-8-3-v10-1","title":"K\u0026N Air Intake 2004-2006 Dodge Ram SRT-10 8.3 V10","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1541 and it fits 2004-2006 Dodge Ram SRT-10 8.3 V10 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118162096247,"sku":"57-1541","price":533.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/dcca78a3f08a860cbc0163f1fe465b6a.jpg?v=1571439022"},{"product_id":"k-n-air-intake-2005-2010-dodge-300c-charger-magnum-5-7-and-6-1-v8-3","title":"K\u0026N Air Intake 2005-2010 Dodge 300C Charger Magnum 5.7 and 6.1 V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1542 and it fits 2005-2010 Dodge 300C Charger Magnum 5.7 and 6.1 V8 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118162129015,"sku":"57-1542","price":433.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/5228313aac3a7b51d318ea92f9eef4a7.jpg?v=1571439022"},{"product_id":"k-n-air-intake-2005-2010-dodge-charger-magnum-300-3-5-v6-3","title":"K\u0026N Air Intake 2005-2010 Dodge Charger Magnum 300 3.5 V6","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1543 and it fits 2005-2010 Dodge Charger Magnum 300 3.5 V6 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118162161783,"sku":"57-1543","price":484.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/a9f22a954a42d3bf82a595ab180a5845.jpg?v=1571439022"},{"product_id":"k-n-air-intake-2005-2010-dodge-dakota-4-7-v8-and-2006-2007-mitsubishi-raider-4-7-v8-4","title":"K\u0026N Air Intake 2005-2010 Dodge Dakota 4.7 V8 and 2006-2007 Mitsubishi Raider 4.7 V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1546 and it fits 2005-2010 Dodge Dakota 4.7 V8 and 2006-2007 Mitsubishi Raider 4.7 V8 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118162194551,"sku":"57-1546","price":532.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/cae607332d6138855754f77402d967d2.jpg?v=1571439022"},{"product_id":"k-n-air-intake-2005-2006-dodge-dakota-and-2006-mitsubishi-raider-3-6-v6-4","title":"K\u0026N Air Intake 2005-2006 Dodge Dakota and 2006 Mitsubishi Raider 3.6 V6","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1547 and it fits 2005-2006 Dodge Dakota and 2006 Mitsubishi Raider 3.6 V6 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118162227319,"sku":"57-1547","price":511.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/7bfff66d9e79d2702c957ec288c3e921.jpg?v=1571439022"},{"product_id":"k-n-air-intake-2007-2008-dodge-nitro-3-7-v6-2","title":"K\u0026N Air Intake 2007-2008 Dodge Nitro 3.7 V6","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1554 and it fits 2007-2008 Dodge Nitro 3.7 V6 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118162522231,"sku":"57-1554","price":508.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/0b477824e53210bb1de6fe7615f02be7.jpg?v=1571439022"},{"product_id":"k-n-intake-2011-2018-chrysler-300c-dodge-charger-challenger-5-7-v8-1","title":"K\u0026N Intake 2011-2018 Chrysler 300C Dodge Charger Challenger 5.7 V8","description":"\u003cimg src=\"\/lib\/harleynace\/carbwarning.jpg\"\u003eK\u0026amp;N 63 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 63 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 63-1114 and it fits 2011-2018 Chrysler 300C Dodge Charger, Challenger (5.7 V8 Models) models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118181331063,"sku":"63-1114","price":409.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/7c3ac2954e45ad57e68ceab8f100e65a.jpg?v=1571439038"},{"product_id":"k-n-air-intake-2008-2010-dodge-chrysler-300-charger-and-magnum-2-7-v6-3","title":"K\u0026N Air Intake 2008-2010 Dodge \/ Chrysler 300 Charger and Magnum 2.7 V6","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 63 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 63-1544 and it fits 2005-2010 Dodge \/ Chrysler 300 Charger and Magnum 2.7 V6 models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118181822583,"sku":"57-1544","price":500.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/9e5f94bbdbdee45172febfa05f83d2c3.jpg?v=1571439038"},{"product_id":"k-n-air-intake-2008-2010-dodge-caliber-1-8-2-0-2-4-and-2007-2010-jeep-compass-patriot-2-0-2-7","title":"K\u0026N Air Intake 2008-2010 Dodge Caliber 1.8 2.0 2.4 AND 2007-2010 Jeep Compass, Patriot 2.0 2.4","description":"K\u0026amp;N 63 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 63 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1552 and it fits 2008-2010 Dodge Caliber 1.8 2.0 2.4 AND 2007-2010 Jeep Compass, Patriot 2.0 2.4 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal and comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118181920887,"sku":"57-1552","price":470.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/c4b7595dd8f8c9f0a6f878ddf3587eaf.jpg?v=1571439038"},{"product_id":"k-n-air-intake-2007-2011-dodge-nitro-4-0-v6-1","title":"K\u0026N Air Intake 2007-2011 Dodge Nitro 4.0 V6","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 63-1556 and it fits 2007-2011 Dodge Nitro 4.0 V6 models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e and is 50 state street legal.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118182019191,"sku":"57-1556","price":445.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/31aa91d4070c04f24fb12bf31e9e9c7e.jpg?v=1571439038"},{"product_id":"k-n-air-intake-2007-2009-dodge-ram-2500-3500-6-7-diesel-1","title":"K\u0026N Air Intake 2007-2009 Dodge Ram 2500 3500 6.7 Diesel","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1557 and it fits 2007-2009 Dodge Ram 2500 3500 6.7 Diesel models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal and comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118182084727,"sku":"57-1557","price":520.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/eac7d6e4ab8159b7bb8f060cc6f365cb.jpg?v=1571439038"},{"product_id":"k-n-air-intake-2007-2008-dodge-dakota-and-mitsubishi-raider-3-7-v6-4","title":"K\u0026N Air Intake 2007-2008 Dodge Dakota and Mitsubishi Raider 3.7 V6","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1558 and it fits 2007-2008 Dodge Dakota and Mitsubishi Raider 3.7 V6 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state street legal and comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118182117495,"sku":"57-1558","price":496.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/ad447cff2631fe70645141bd19e1b67c.jpg?v=1571439038"},{"product_id":"k-n-air-intake-2008-2009-dodge-caliber-srt-4-2-5","title":"K\u0026N Air Intake 2008-2009 Dodge Caliber SRT-4 2.4","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1560 and it fits 2008-2009 Dodge Caliber SRT-4 2.4 models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118182183031,"sku":"57-1560","price":445.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/b2e09e839951aca153372d974a126122.jpg?v=1571439038"},{"product_id":"k-n-air-intake-2009-2018-dodge-ram-1500-5-7-v8","title":"K\u0026N Air Intake 2009-2018 Dodge Ram 1500 5.7 V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1561 and it fits 2009-2018 Dodge Ram 1500 5.7 V8 models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118182248567,"sku":"57-1561","price":443.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/4beb00947365c8da6977bdcd4a9654ca.jpg?v=1571439038"},{"product_id":"k-n-air-intake-2011-2018-dodge-durango-and-jeep-grand-cherokee-5-7-v8","title":"K\u0026N Air Intake 2011-2018 Dodge Durango and Jeep Grand Cherokee 5.7 V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1563 and it fits 2011-2018 Dodge Durango and Jeep Grand Cherokee 5.7 V8 models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e and is 50 state street legal.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118182314103,"sku":"57-1563","price":406.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/3e58df2dd8ea35a4923a30a8cc26f3e6.jpg?v=1571439038"},{"product_id":"k-n-intake-2011-2018-dodge-challenger-charger-chrysler-300-3-6-v6-1","title":"K\u0026N Intake 2011-2018 Dodge Challenger Charger Chrysler 300 3.6 V6","description":"K\u0026amp;N 63 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 63 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 63-1564 and it fits 2011-2018 Dodge \/ Chrysler Challenger Charger and Magnum 3.6 V6 models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118182346871,"sku":"63-1564","price":421.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/834b0c3f9ddecc8eff889f3e04c826a5.jpg?v=1571439039"},{"product_id":"k-n-air-intake-2011-2018-chrysler-300c-dodge-charger-challenger-6-4-v8","title":"K\u0026N Air Intake 2011-2018 Chrysler 300C Dodge Charger Challenger 6.4 V8","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 6357 1565 and it fits 2011-2018 Chrysler 300C Dodge Charger, Challenger (6.4 V8 Models) .\u003cbr\u003e\u003cbr\u003eThis item is 50 state legal and comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118182379639,"sku":"57-1565","price":422.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/7c5b68016f41178a2445adee2ea266da.jpg?v=1571439039"},{"product_id":"k-n-air-intake-2011-2014-dodge-caliber-2-0-and-2011-2017-jeep-compass-patriot-2-1","title":"K\u0026N Air Intake 2011-2014 Dodge Caliber 2.0 AND 2011-2017 Jeep Compass, Patriot 2.0","description":"K\u0026amp;N 57 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 57 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 57-1567 and it fits  2011-2012 Dodge Caliber 2.0 AND 2011-2017 Jeep Compass, Patriot 2.0 models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e and is 50 state street legal.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118182445175,"sku":"57-1567","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/ebf08714edc89dab4a7e3f7342a530f5.jpg?v=1571439039"},{"product_id":"k-n-intake-2014-2016-dodge-ram-3-0-diesel-models","title":"K\u0026N Intake 2014-2016 Dodge Ram (3.0 Diesel Models)","description":"K\u0026amp;N 63 Series Gen II Air Intake Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K\u0026amp;N O\/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube.  Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N 63 Series kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.  Next K\u0026amp;N attaches the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE).  This process allows K\u0026amp;N to precisely shape the tube to reduce turbulence and accelerate airflow into the engine.  This is why some K\u0026amp;N tubes have unique shapes that are specifically engineered for each application.  Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life.  Put all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 63-1571 and it fits 2014-2016 Dodge Ram 3.0 Diesel models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.  11.22 HP Increase 15.34 lbs Torque Increase.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118182609015,"sku":"63-1571","price":340.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/b152cd83d15ce84587a230c74d35ad25.jpg?v=1571439039"},{"product_id":"k-n-air-intake-typhoon-series-2000-2005-dodge-neon-2-1","title":"K\u0026N Air Intake (Typhoon Series) 2000-2005 Dodge Neon 2.0","description":"Built for performance and show, the 69 Series Typhoon  Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N Typhoon Intake kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  \u003cbr\u003e\u003cbr\u003ePut all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 69-2520TP or 69-2520TR (depending on your color choice)  and it fits 2000-2005 Dodge Neon 2.0 models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118194471031,"sku":"69-2520TR","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/7d3ecac95e91695ca195ee06ed3a4789.jpg?v=1571439045"},{"product_id":"k-n-air-intake-typhoon-series-2003-2005-dodge-neon-srt-4-2-5","title":"K\u0026N Air Intake (Typhoon Series) 2003-2005 Dodge Neon SRT-4 2.4","description":"Built for performance and show, the 69 Series Typhoon  Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N Typhoon Intake kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  \u003cbr\u003e\u003cbr\u003ePut all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 69-2521TP or 69-2521TB (depending on your color choice)  and it fits 2003-2005 Dodge Neon SRT-4 2.4 models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118194536567,"sku":"69-2521TB","price":584.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/48a28bbd151af854d8b73bd4945b4b57.jpg?v=1571439045"},{"product_id":"k-n-air-intake-typhoon-series-2005-2018-dodge-challenger-charger-magnum-chrysler-300-5-7-6-1-v8-4","title":"K\u0026N Air Intake (Typhoon Series) 2005-2018 Dodge Challenger Charger Magnum Chrysler 300 5.7 + 6.1 V8","description":"\u003cimg src=\"\/lib\/harleynace\/carbwarning.jpg\"\u003eBuilt for performance and show, the 69 Series Typhoon  Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N Typhoon Intake kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  \u003cbr\u003e\u003cbr\u003ePut all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 69-2526TP and it fits 2005-2018 Dodge \/ Chrysler Challenger Charger and Magnum 5.7 and 6.1 V8 models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118194667639,"sku":"69-2526TP","price":556.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/2bbe3a1fe3d38e5b57ae0e1af566c1f0.jpg?v=1571439045"},{"product_id":"k-n-air-intake-typhoon-series-2008-2010-dodge-viper-8-4-v10-1","title":"K\u0026N Air Intake (Typhoon Series) 2008-2010 Dodge Viper 8.4 V10","description":"Built for performance and show, the 69 Series Typhoon  Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N Typhoon Intake kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  \u003cbr\u003e\u003cbr\u003ePut all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 69-2527TTR and it fits 2008-2010 Dodge Viper 8.4 V10 models.\u003cbr\u003e\u003cbr\u003eThis item is 50 state legal and comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118194733175,"sku":"69-2527TTR","price":902.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/47df3e65b880c94bfa45bab685069e3e.jpg?v=1571439046"},{"product_id":"k-n-air-intake-typhoon-series-2013-2016-dodge-viper-8-4-v10-1","title":"K\u0026N Air Intake (Typhoon Series) 2013-2016 Dodge Viper 8.4 V10","description":"Built for performance and show, the 69 Series Typhoon  Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N Typhoon Intake kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  \u003cbr\u003e\u003cbr\u003ePut all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 69-2528TTK and it fits 2013-2016 Dodge Viper 8.4 V10 models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118194765943,"sku":"69-2528TTK","price":829.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/98582a4114a5edc77327bcbf079b522c.jpg?v=1571439046"},{"product_id":"k-n-air-intake-typhoon-series-2008-2013-dodge-avenger-2-5","title":"K\u0026N Air Intake (Typhoon Series) 2008-2013 Dodge Avenger 2.4","description":"Built for performance and show, the 69 Series Typhoon  Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K\u0026amp;N Air Filter.  The weakest link in the airflow “chain” robs a vehicle of its natural horsepower.  Often that weak point is the factory air path leading to the Engine.  K\u0026amp;N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine.  The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. \u003cbr\u003e\u003cbr\u003e K\u0026amp;N Typhoon Intake kits are truly state-of-the-art.  K\u0026amp;N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points.  This extra filter size provides even more airflow at lower restriction than a standard K\u0026amp;N O\/E replacement filter that is limited to the size of the factory air box.  The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).  \u003cbr\u003e\u003cbr\u003ePut all this together and you have the best high-flow intake system available today.   \u003cbr\u003e\u003cbr\u003eThe part number for this item is 69-2542TS and it fits 2008-2013 Dodge Avenger 2.4 models.\u003cbr\u003e\u003cbr\u003eThis item comes with a \u003cb\u003eLifetime Warranty\u003c\/b\u003e.","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":8118194897015,"sku":"69-2542TS","price":487.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/products\/7d75e22fb594122151624a76c586badc.jpg?v=1571439046"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1669\/5085\/collections\/k-n-air-intakes-for-dodge-2.png?v=1525892550","url":"https:\/\/www.bolomotorsports.com\/collections\/k-n-air-intakes-for-dodge.oembed","provider":"Bolo Motorsports","version":"1.0","type":"link"}